,

34200-40K


4L80E Smart-Tech® Overrun Clutch Valve Kit

$170.20

4L80E Smart-Tech® Overrun Clutch Valve Kit

Fits units ’97-later.

 

Insufficient holding power in the Overdrive roller clutch is the underlying cause of chronic Overdrive roller clutch failure in hardworking 4L80-E and 4L85-E transmissions. When the roller clutch fails, the damage can be catastrophic and the only fix is replacing the drum, planetary assembly and mating components.

The Sonnax Smart-Tech overrun clutch valve kit 34200-40K offers a hydraulic solution to this known mechanical problem. With unique rerouting of hydraulic fluid pressure, this patented kit keeps the overrun clutch applied at all times (except OD 4th), reinforcing the roller clutch to adequately support heavy loads.

  • Improves OD roller clutch holding power in D4 and Reverse ranges
  • Extends the life of workhorse transmissions while preventing warranty claims and comebacks
  • Installs quickly onto the valve body — no transmission removal needed
Range Gear Overrun Clutch with
Sonnax 34200-40K
Clutch Valve Kit
Overrun Clutch
with OE
Clutch Valve
Park Applied
Reverse Applied
Neutral Applied
Overdrive 1st Applied
2nd Applied
3rd Applied
4th
Drive 1st Applied Applied
2nd Applied Applied
3rd Applied Applied
D2 1st Applied Applied
2nd Applied Applied
D1 1st Applied Applied

Note

Any other modifications to the valve body should be completed prior to installing Sonnax Smart-Tech® overrun clutch valve kit. With minor lube tube modification, the Sonnax kit can be installed in ’92-’96 units. Please contact Sonnax Product Support via email or by calling +1 (802) 463-0288.

Contents

  • Socket-Head Cap Screw Long
  • Socket-Head Cap Screws (2) Short
  • Button-Head Screws (2)
  • Retaining Pins (2)
  • Valve Manifold
  • Short Tube
  • Long Tube
  • S-Shaped Bracket
  • Flat Bracket
  • L-Shaped Bracket
  • Gasket
  • End Plug
  • Valve
  • Spring
  • Sleeve
  • Tabbed Bore Plug
  • O-Rings (3) 1 Extra
  • Cap Plugs (2)
  • Aluminum Plugs (2) Small, 1 Extra
  • Rivets (2) 1 Extra, Not Shown
  • Alignment Pins (2)
  • Drill Jig
  • Drill Bit Small (.109″ dia.)
  • Drill Bit Large (.180″ dia.)
Weight 1.08 lbs
Dimensions 7 × 9 × 2 in